Safety, Warranty & Regulatory Guide for Google Pixel Watch 3

Where to find product information

This guide includes the basic safety guidelines in the printed Safety & Warranty booklet that comes enclosed with your watch. It also includes additional safety, regulatory, and warranty information about your watch.

Safety, and regulatory information: g.co/pixelwatch/regulatory

Warranty details for your country of purchase, including instructions for making a claim: g.co/devicewarranty

Electronic regulatory labels (and specific absorption rate (SAR) values) for your device: Settings > System > Regulatory Information

Google Pixel Watch 3 help: g.co/pixelwatch/help

Safety Warnings

WARNING: HEALTH AND SAFETY INFORMATION; READ BEFORE USE TO REDUCE THE RISK OF PERSONAL INJURY, DISCOMFORT, PROPERTY DAMAGE, INCLUDING DAMAGE TO YOUR DEVICE, ACCESSORIES OR ANY CONNECTED DEVICES, AND OTHER POTENTIAL HAZARDS
 

HANDLING
Handle your watch with care. You may damage the device, the battery or the charging cable if you disassemble, drop, bend, burn, crush or puncture your device. Do not use a watch with a damaged enclosure, a cracked screen or some other form of physical damage. Using a damaged watch may cause overheating or injury. Do not expose your watch to liquids, which can cause a short circuit and overheating. If your watch gets wet, do not attempt to dry it using an external heat source.  

Your watch works best in ambient temperatures between 32°F and 95°F (0°C and 35°C), and should be stored between ambient temperatures of -4°F and 113°F (-20°C and 45°C). Do not expose your watch to temperatures above 113°F (45°C), such as on a car dashboard or near a heating vent, as this may damage the watch, overheat the battery, or pose a risk of fire. Keep your watch away from heat sources and out of direct sunlight. If your device becomes too hot, disconnect it from its power source if it is plugged in, move it to a cooler place and do not use it until it has cooled. Your watch is designed to work best at an altitude of up to 16404 ft (5000m).
 

REPAIR & SERVICE
Do not attempt to repair your watch yourself. Disassembling the device may result in loss of water or dust resistance or cause injury or damage to your device. 
Contact customer service if your watch is not working properly or has been damaged at g.co/pixelwatch/contact
 

CHARGING
Be sure the charging cable, power adapter (not included with the watch) and watch are well ventilated when in use or charging. Using damaged cables,  power adapters, or charging when moisture is present, can cause fire, electric shock, injury, or damage to the watch or other property. Do not charge your watch when it’s wet. Avoid charging your device in direct sunlight.  

When charging the device, make sure the power adapter is plugged into a power outlet near the device and is easily accessible. Do not force this power adapter and other plugs or power adapters to a power outlet if space is not sufficient to accommodate both. When disconnecting the power adapter from a power outlet, pull on the adapter, never on the charging cable. Do not twist or pinch the cable, and do not force a connector into a port. If you receive a message while charging that instructs you to unplug the charging device, disconnect the charging device or power adapter. Before attempting to charge again, make sure both the exposed pins of the charging cable and the watch’s charge contacts are dry and clear of any objects.  

Do not place metallic objects, metallic bands or magnetic objects on the exposed pins of the charging cable when it is plugged in, as this could cause heating of the object or charging cable.

Do not force the watch onto the charging cable as this may damage the device and the charging cable. Instead, allow the magnets to properly place the watch on the charging cable. 

Only charge your watch with the included charging cable and use a USB-C PD compliant charger or compatible charging accessories available on the Google Store or at Google authorized resellers (look for Google’s “made for” badge). The AC adapter must be certified with a Limited Power Source output per IEC 60950-1 and/or classified PS2 per IEC 62368-1, rated: 5 Volts DC, maximum 3 Amp and qualified per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. Failure to use compatible charging accessories can cause fire, electric shock, injury, or damage to the device and the accessories. 

 

PROLONGED HEAT EXPOSURE
The watch and its charging cable generate heat during normal operation, and comply with applicable surface temperature standards and limits.  Avoid prolonged skin contact when your device is charging because exposing skin to hot surfaces for a long period of time may cause discomfort or burns. Do not sleep on or with your device or its charging cable while it is charging, or cover them with a blanket or pillow while any of them are connected to a power source or charging. Be aware of this issue if you have a physical condition that affects your ability to detect heat against your skin. Remove your watch if it feels hot or uncomfortably warm.
 

CHILD SAFETY
This device is not a toy. Your watch may contain (or may come with) small parts, plastic, cables, glass, or metal elements, and parts with sharp edges that may cause an injury or create a choking or strangulation hazard. Children have strangled on cords and cables. Keep the watch and its accessories, including cords and cables, out of the reach of children (more than 3 feet (0.9 meters) away) and do not allow them to play with the watch and its accessories. They could hurt themselves or others, or could accidentally damage the watch. Seek medical attention immediately if small parts are swallowed or injury occurs.
 

HEARING LOSS
Prolonged exposure to loud sounds (including music) can cause hearing loss. To prevent possible hearing damage, avoid listening at high volume for prolonged periods of time. Continued exposure to high volumes and background noise can make loud sounds seem quieter than they actually are. Check the volume before using headphones or earphones.

 

BATTERY
This watch contains a rechargeable lithium-ion battery, which is a sensitive component that can cause injury if damaged. Do not attempt to remove the battery. Contact Google or a Google authorized service provider to replace the battery.  For contact information, visit g.co/pixelwatch/contact. Replacement by non-qualified professionals can damage your device. Improper replacement or use of a non-qualified battery may present a risk of fire, explosion, leakage, or other hazard. Do not modify or remanufacture/refurbish the battery, puncture or attempt to insert objects into the battery, immerse or expose the battery to water or other liquids, or expose the battery to fire, excessive heat, and/or other hazards. 

This device comes with a battery that has proper certifications. In addition, the battery complies with IEEE 1725 standard.  

 

                 

 

Models: GBDU9, GG3HH

Shenzhen Highpower Technology Co., Ltd.

Building 1, 68 Xinxia Road, PinghuTown, Longgang District, Shenzhen, Guangdong, 518111, China

Marketing@highpowertech.com

Battery Model ID: G1QME

 

Models: GRY0E, GGE4J 

Sunwoda Electronic Co., Ltd.

No.2, Yihe Rd, Shilong Community, Shiyan Street, Baoan District, Shenzhen, Guangdong, 518108, China

sunwoda@sunwoda.com

Battery Model ID: GY96V

 

Do not modify or remanufacture/refurbish the battery, puncture or attempt to insert objects into the battery, immerse or expose the battery to water or other liquids, or expose the battery to fire, excessive heat, and/or other hazards.


DISPOSAL, TRANSPORTATION, & RECYCLING
Dispose of and transport your device, batteries and accessories according to local environmental and transportation regulations. Do not improperly transport them or dispose of them in normal household waste. Improper disposal or transport may lead to fire, explosion, and/or other hazards. Do not open, crush, heat above 113°F (45°C), or incinerate. For more information on recycling your device, batteries and accessories, visit g.co/HWRecyclingProgram

 

ENVIRONMENTAL RESTRICTIONS
To prevent damage to your device parts or internal circuits, do not use or store the device or its accessories in dusty, smoky, damp, or dirty environments, or near magnetic fields.  Keep it away from heat sources and out of direct sunlight. Do not leave your device inside a vehicle or in places where the temperature may exceed 113°F (45°C), such as on a car dashboard, window sill, near a heating vent, or behind glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the device, overheat the battery, or pose a risk of fire or explosion. 
 

EXPLOSIVE ATMOSPHERES
Do not charge, use, store, or transport your device where flammables or explosives are stored (e.g., in gas stations, fuel depots, or chemical plants). Do not use your device where blasting operations are in progress, or in potentially explosive atmospheres such as fuelling areas, fuel storehouses, below deck on boats, fuel, or chemical transfer or storage areas, and in areas where the air contains chemicals, vapors, or particles (such as grain, dust, or metal powders). Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Observe all notices and signs where these hazards might exist. 
 

NAVIGATION
Your device can access mapping and navigation services. Maps and navigation depend on a working data connection and location services, and may not be available at all times or in all areas. Maps and directions may be inaccurate and actual conditions may differ from the map, data, traffic, directions, content and other results. Carefully review directions, follow all applicable traffic laws and signs, exercise your independent judgment and apply common sense, and use mapping and navigation services at your own risk. You are responsible at all times for your conduct and its consequences. Navigation with AR requires up to date Google Street View imagery and bright outdoor light, and isn’t available in India.
 

DISTRACTION
Using your device when performing certain activities can distract you and may cause a dangerous situation for you or others. To reduce the risk of accidents (and because it’s prohibited by law in many places), do not use your device while driving, bicycling, or while operating machinery, and do not use it while engaging in any activities that have potentially serious consequences. Follow local laws about using mobile devices, headphones, and helmets. 
 

RADIO FREQUENCY EXPOSURE 
This device has been evaluated and meets the applicable regulatory requirements for exposure to radio waves and is designed and manufactured not to exceed the applicable emission limits for exposure to radio frequency (RF) energy. 

 

Model: GG3HH
In the countries where the Specific Absorption Rate (SAR) limit is 1.6 W/kg averaged over one gram of tissue for use against the head or face and 4.0 W/kg averaged over ten grams of tissue for use against the limb or wrist. The highest SAR values for this device type are 0.12 W/kg against the head or face with 10 mm (0.4 in) separation and 0.06 W/kg when used against the limb with no separation. 
In the countries where the Specific Absorption Rate (SAR) limit is 2.0 W/kg averaged over ten grams of tissue for use against the face, and 4.0 W/kg averaged over ten grams of tissue for use against the limb or wrist.  The highest SAR values for this device type are 0.04 W/kg against the face with 10 mm (0.4 in) separation and 0.06 W/kg when used against the limb with no separation.

Model: GBDU9
In the countries where the Specific Absorption Rate (SAR) limit is 1.6 W/kg averaged over one gram of tissue for use against the head or face and 4.0 W/kg averaged over ten grams of tissue for use against the limb or wrist. The highest SAR values for this device type are 0.28 W/kg against the head or face with 10 mm (0.4 in) separation and 1.05 W/kg when used against the limb with no separation. 
In the countries where the Specific Absorption Rate (SAR) limit is 2.0 W/kg averaged over ten grams of tissue for use against the face, and 4.0 W/kg averaged over ten grams of tissue for use against the limb or wrist. The highest SAR values for this device type are 0.08 W/kg against the face with 10 mm (0.4 in) separation and 1.05 W/kg when used against the limb with no separation.

Model: GGE4J
In the countries where the Specific Absorption Rate (SAR) limit is 1.6 W/kg averaged over one gram of tissue for use against the head or face and 4.0 W/kg averaged over ten grams of tissue for use against the limb or wrist. The highest SAR values for this device type are 0.23  W/kg against the head or face with 10 mm (0.4 in) separation and 0.04 W/kg when used against the limb with no separation. 
In the countries where the Specific Absorption Rate (SAR) limit is 2.0 W/kg averaged over ten grams of tissue for use against the face, and 4.0 W/kg averaged over ten grams of tissue for use against the limb or wrist.  The highest SAR values for this device type are 0.07 W/kg against the face with 10 mm (0.4 in) separation and 0.06 W/kg when used against the limb with no separation.

Model: GRY0E
In the countries where the Specific Absorption Rate (SAR) limit is 1.6 W/kg averaged over one gram of tissue for use against the head or face and 4.0 W/kg averaged over ten grams of tissue for use against the limb or wrist. The highest SAR values for this device type are 0.26 W/kg against the head or face with 10 mm (0.4 in) separation and 0.44 W/kg when used against the limb with no separation. 
In the countries where the Specific Absorption Rate (SAR) limit is 2.0 W/kg averaged over ten grams of tissue for use against the face, and 4.0 W/kg averaged over ten grams of tissue for use against the limb or wrist. The highest SAR values for this device type are 0.15 W/kg against the face with 10 mm (0.4 in) separation and 0.52 W/kg when used against the limb with no separation.

You can find the SAR values applicable to each of those jurisdictions on your device: Settings > System > Regulatory Information 

To reduce exposure to RF energy, use a hands-free option, such as the built-in speakerphone, the supplied headphones, or other similar accessories. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
 

PRECAUTIONS FOR USE OF THE DEVICE
The use of the device may be prohibited in certain situations (for example, while driving). For your safety, do not do anything that may cause distraction when driving. The use of the device may also be subject to restrictions in certain places (for example, in hospitals, planes, gas stations, schools ...).

Always keep the device and its charger at a safe distance away from the pacemaker or any other implanted medical device (insulin pumps, neurostimulators, etc.). 

To reduce the amount of exposure to radiation, it is recommended to:

(1) Use the device in good reception conditions, referring to the reception icon on your screen (avoid using it in an underground car park, when traveling by train or car, etc.);
(2) when in use, keep the device away from the belly for pregnant women, and away from the lower abdomen for teenagers;
(3) provide reasonable use of the device by children and teenagers, for example by avoiding night calls and limiting the frequency and duration of calls.

 

You can find additional information about SAR at the following pages:

fcc.gov
icnirp.org
ec.europa.eu
dot.gov.in
 

RADIO FREQUENCY INTERFERENCE 
Observe rules that prohibit the use of wireless technology (e.g. cellular or Wi-Fi). Your device is designed to comply with regulations governing radio frequency emissions but use of wireless devices can negatively affect other electronic equipment. For example, while flying in an aircraft or immediately before boarding, use your wireless device only according to instructions provided by the airline. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. You may be able to use your device in airplane mode.
 

ULTRA WIDEBAND (UWB)
When the use of Ultra Wideband is prohibited in your region, such as while in an aircraft, Ultra Wideband can be turned off by turning on Airplane mode. Turn on Airplane mode by going to Settings > Connectivity > Tap Airplane mode. In the US, ​​UWB devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited.

 

EMERGENCY COMMUNICATIONS
Wireless devices may not be reliable for emergency communications.  This device operates using radio signals and cannot guarantee that it will establish or maintain a connection in all conditions. Your device is also powered by a rechargeable battery that may be affected by temperature, use, damage, and other conditions. Never rely solely on any wireless phone for emergency communications. While some jurisdictions transmit emergency information over wireless networks, your device may not always receive these communications depending upon network connectivity or other factors.  Access to some features and emergency information or communications may not be available in all areas or languages. When the watch’s screen is locked, you can initiate an emergency call by quickly pressing the crown 5 consecutive times. Performing this action will either call emergency services or an emergency contact of your choosing.

MEDICAL DEVICE INTERFERENCE
Your device uses radios and other components that emit electromagnetic fields, and also contains magnets. These electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and other implanted medical devices. Always keep the watch and its charging cable at a safe distance away from the medical device. If you have questions about using your Google device with or near your medical device, consult your healthcare provider before using your watch. If you suspect your watch is interfering with your medical device, turn off your Google device and consult your physician for information specific to your medical device.

 

HOSPITALS
Switch off your wireless device when requested to do so in hospitals, clinics or health care
facilities. These requests are designed to prevent possible interference with sensitive medical 
equipment.
 

HEALTH RELATED FUNCTIONS
Your watch and its pedometer, sleep, exercise, heart rate, and associated wellness and fitness functions are not medical devices and are intended for information purposes only and should not be used as a substitute for medical judgment. They are not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, monitoring, mitigation, treatment, or prevention of disease or other conditions or as compensation for any injury or disability.

 

NOTICE FOR PRODUCTS UTILIZING FITBIT PUREPULSE TECHNOLOGY
PurePulse products have a heart rate tracking feature that may pose risks to users with certain health conditions.

Consult your doctor prior to use if you:

• have a medical or heart condition;
• are taking any photosensitive medicine;
• have epilepsy or are sensitive to flashing lights;
• have reduced circulation or bruise easily; or
• have tendonitis, carpal tunnel syndrome, or other musculoskeletal disorders.

 

NOTICE FOR PRODUCTS UTILIZING MENSTRUAL HEALTH TRACKING FEATURE
This feature is not intended to be used for contraception, conception or other medical purposes. Fitbit does not guarantee or warrant that this feature can be used to achieve particular results. This feature may not accurately predict your menstrual cycles, ovulation, fertility windows or related information. This feature is intended only to help users monitor and keep track of certain general wellness information and cannot be used to prevent, monitor, diagnose, cure, treat, or mitigate any disease or condition.

 

LED
The LEDs visible on your device are safe under reasonably foreseeable conditions per the requirements in IEC 62471. However, it is recommended that you do not direct the LEDs at anyone’s eyes.

 

SKIN IRRITATION
Some people may experience reactions to materials, such as nickel or latex, found in wearable items that are in extended contact with the skin. This can be due to allergies, the presence of skin irritants (like soap, sunscreen or sweat), or other causes. Keep your watch clean and dry and do not wear it too tightly. See g.co/pixelwatch/bands for wearing recommendations. Periodically remove the watch for an hour after extended wear to reduce the chance of skin irritation. Remove the watch, stop use and consult a physician if you experience skin irritation or if wear or fit of the device causes any discomfort. For more information visit g.co/pixelwatch/care

MEDICAL CONDITIONS
A small percentage of users may experience headaches, seizures, blackouts, eye strain, fatigue or dry eyes that are triggered by visual stimuli, such as flashing lights or bright patterns, or use of electronics with displays. Those symptoms can be experienced by people who have never previously experienced such issues. If you have a history of seizures, blackouts, epilepsy, a medical condition, or experience discomfort that you believe could be affected by your watch, consult with a doctor before using your device. Stop using your watch immediately and contact a doctor if you experience any symptoms that you believe could be caused or affected by your watch (for example, headaches, blackouts, or seizures).
 

MUSCULOSKELETAL DISORDERS
Repetitive activities, such as typing, tapping, or swiping on the screen of your watch, may cause discomfort in your fingers, hands, wrists, arms, shoulders, or other parts of your body. If you experience any discomfort from such activities, stop using your watch and consult with your doctor.

Proper Handling and Usage

Follow these  guidelines when using, storing or cleaning of your watch.


OPERATING TEMPERATURE
Do not use or charge the watch at ambient temperatures lower than 0°C (32°F) or higher than 35°C (95°F). If the interior temperature of the device exceeds normal operating temperatures, you may experience the following behaviors while the device tries to regulate its temperature: reduced performance and connectivity, inability to charge, or powering down of the display or device power down. You may not be able to use the device while it regulates its temperature. Move the device to a cooler (or warmer) location and wait a few minutes before attempting to use it again.  

 

CARE & CLEANING
Unplug the watch and charging cable before cleaning, during lightning storms, or when unused for extended periods of time. Do not clean your watch while it is charging as this may cause injury or damage to your device. Avoid solvent and abrasive material that may cause damage to the product surface. Do not use any chemical detergent, powder, or other chemical agents (such as benzene) to clean the watch or accessories.   

To clean your watch, we recommend wiping your device with a damp cloth (no soap). Let air-dry or wipe with a non-abrasive cloth.  For additional care and cleaning instructions see g.co/pixelwatch/care

 

DUST AND WATER RESISTANCE
Your watch is designed to comply with dust and water protection rating IP68 under IEC 60529 standard and and water protection rating 5 ATM under ISO Standard 22810:2010 when it leaves the factory, but it is not dust proof or water proof. Dust and water resistance are not permanent conditions and are diminished or lost over time due to normal wear and tear, device repair, disassembly, or damage. Dropping your device may result in loss of dust or water resistance.  Liquid damage voids the warranty. Do not expose your watch or charging cable to liquids or to dust, which can cause short circuit and/or overheating. The charging cable and other accessories, including some Google Pixel Watch bands are not dust or water resistant and should not be exposed to either. For more information, visit g.co/pixelwatch/water

 

MAGNETIC FIELDS
Avoid placing any items containing magnets or which are sensitive to magnetism, such as credit cards, bank cards, audio/video tapes, or magnetic memory devices, near this watch or its charging cable, because you may lose information stored on such items. Items containing information sensitive to magnets should be kept at least 2 inches (5 cm) away from this watch and charging cable.

Service & Support

Unauthorized repairs or modifications could result in permanent damage to the device, and may affect your warranty coverage and regulatory authorizations. The watch and charging cable should only be repaired by Google or a Google authorized service provider. Contact customer service for authorized service. 

If you send your device in for service, you might receive a replacement in place of your original device. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired.  Refurbished parts may be used to repair the goods. If the goods are capable of retaining user-generated data then the repair or replacement may result in loss of the data. For online help and support, visit g.co/pixelwatch/help 

Regulatory Information

Regulatory information, certification, and compliance marks specific to the watch can be found on your watch under Settings > System > Regulatory Information and on the back and within the band inserts of your device. 

 

EMC COMPLIANCE STATEMENT 
Important: This device and its charging cable have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
 

Regulatory Information: United States

FCC REGULATORY COMPLIANCE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to operate the equipment.

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1. These devices may not cause harmful interference.
2. These devices must accept any interference received, including interference that may cause undesired operation.

 

Model number: GBDU9 (LTE) , GG3HH (Wi-Fi)
Product name: Google Pixel Watch 3 (41mm)

 

Model number: GRY0E (LTE), GGE4J (Wi-Fi)
Product name: Google Pixel Watch 3 (45mm)

 

US Responsible Party
Google LLC
1600 Amphitheatre Parkway
Mountain View, CA 94043
Contact: g.co/pixelwatch/contact

  

Regulatory Information: Canada

 

INDUSTRY CANADA, CLASS B
This device complies with ICES-003 Class B limits. 
 

Your watch complies with ISED license-exempt RSS standard(s). Operation is subject to the following two conditions: 
(1) this device may not cause interference, and 
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

 

Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio 
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 
(1) l'appareil ne doit pas produire de brouillage, et 
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
 

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. 

Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

  

Regulatory Information: UK
 

UK COMPLIANCE NOTICE
Hereby, Google LLC declares that radio equipment type: GBDU9, GG3HH, GRY0E, GGE4J are in compliance with Radio Equipment Regulation 2017. The full declaration of conformity may be found at g.co/pixelwatch/regulatory

RESTRICTIONS OR REQUIREMENTS UNDER RADIO EQUIPMENT REGULATIONS 2017  
The device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in the UK. 

 

INFORMATION ON FREQUENCY BANDS AND WIRELESS OUTPUT POWER

United Kingdom

Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

 

NFC: 13.56 MHz is for receiving only.
 

RADIO FREQUENCY INTERFERENCE
Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

ROHS COMPLIANCE
This product is in compliance with Statutory Instrument 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substance in Electrical and Electronic Equipment Regulations.

UK REACH
UK REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, Statutory Instrument 2020 No. 1577) is the UK chemical substances regulatory framework. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at Env-Compliance@google.com

WASTE FROM ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) AND BATTERIES 

 

 

 

The WEEE symbol above means that according to local laws and regulations your product and its battery(ies) should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product, its electrical accessories, and its battery(ies) will help conserve natural resources,  protect human health, and help the environment.

 

Manufacturer: Google LLC 1600 Amphitheatre Parkway Mountain View, CA, USA 94043
Google Commerce Limited UK establishment, Belgrave House, 76 Buckingham Palace Road, London, SW1W 9TQ

Regulatory Information: EU
 

EU COMPLIANCE NOTICE
Hereby, Google LLC declares that radio equipment type: GBDU9, GG3HH, GRY0E, GGE4J is in compliance with Directive 2014/53/EU (Radio Equipment Directive). The full declaration of conformity may be found at g.co/pixelwatch/regulatory

 

RESTRICTIONS OR REQUIREMENTS UNDER DIRECTIVE 2014/53/EU 
The device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK(NI), CH, IS, LI, NO, TR 
 

INFORMATION ON FREQUENCY BANDS AND WIRELESS OUTPUT POWER

European Union

Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

   

NFC: 13.56 MHz is for receiving only.

RADIO FREQUENCY INTERFERENCE
Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.
 

SPECIFIC ABSORPTION RATE (SAR) INFORMATION: FRANCE
Your watch complies with radio frequency specifications when used against the head with no separation and body/limb with no separation, limited to 2 W/kg and 4 W/kg respectively, averaged over 10 grams of tissue. 

 

For GBDU9, the highest Specific Absorption Rate (SAR) values reported for this device type are Face: 0.08 W/kg, Limb: 1.05W/kg. 

For GG3HH, the highest Specific Absorption Rate (SAR) values reported for this device type are Face: 0.04 W/kg, Limb: 0.06 W/kg.

For GRY0E, the highest Specific Absorption Rate (SAR) values reported for this device type are Head: 0.15 W/kg, Limb: 0.52 W/kg.

For GGE4J, the highest Specific Absorption Rate (SAR) values reported for this device type are Head: 0.07 W/kg, Limb: 0.06 W/kg.

 

ECODESIGN FOR ENERGY-RELATED PRODUCTS AND REGULATIONS FOR COMMISSION REGULATION (EU) 2023/826
See Ecodesign Test Summary report at g.co/ecodesign

 

ACTIVATION AND DEACTIVATION OF WIRELESS NETWORK PORTS
Cellular (if applicable): Open the device's Settings app > Go to Connectivity > Turn on or off Airplane mode.
Wi-Fi: Open the device's Settings app > Go to Connectivity > Turn on or off Wi-Fi.
Bluetooth: Open the device's Settings app > Go to Connectivity > Turn on or off Bluetooth.
 

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE AND BATTERY DIRECTIVE

 

The WEEE symbol above means that according to local laws and regulations your product and its battery(ies) should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product, its electrical accessories, and its battery(ies) will help conserve natural resources,  protect human health, and help the environment.

§ 10 I 2 ElektroG: Vor der Entsorgung dieses Geräts (i) Altbatterien/-akkus, sofern sie nicht vom Gerät umschlossen sind, und zerstörungsfrei entnehmbare Lampen zerstörungsfrei trennen und (ii) alle personenbezogenen Daten löschen. § 17 I und II ElektroG: Viele Vertreiber müssen Altgeräte kostenlos zurücknehmen.

 

INFORMAZIONI SULLO SMISTAMENTO DEGLI IMBALLAGGI - ITALIA 
 

ROHS COMPLIANCE

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
 

 

REACH

REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC No 1907/2006) is the EU chemical substances regulatory framework. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at Env-Compliance@google.com.

Manufacturer: Google LLC 1600 Amphitheatre Parkway Mountain View, CA, USA 94043

Google Commerce Limited, 70 Sir John Rogerson’s Quay, Dublin 2, D02 R296, Ireland

 

Regulatory Information: Australia

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range to reduce the potential for harmful interference to co-channel mobile satellite systems.

Ultra Wideband transmitters must not be operated within a nominated distance from specified Australian radio-astronomy sites. For further information about nominated distance, please refer to the Radiocommunications (Low Interference Potential Devices) Class Licence 2015 published by the Australian Communications and Media Authority.

Regulatory Information: Singapore

 

Regulatory Information: Japan

When operating in 5GHz (W52/W53), the device is restricted to indoor use only (except communicate to high power radio).

 

This is a Class B equipment. Although this equipment is intended for use in a residential environment, it could cause poor reception if used near a radio or a television receiver. Please follow instructions in the instruction manual.                                                                

VCCI-B

 

 

FeliCa

 

 

センサーの位置

sensor location

Regulatory Information: India

 

INDIA RECYCLING, E-WASTE MANAGEMENT AND HANDLING STATEMENT 
 

In India, this label indicates that this product should not be thrown away with household waste. It should be deposited at an appropriate facility to allow recovery and recycling.
 

Google declares that your device has been designed and manufactured in compliance with E-Waste (Management) Rules, 2022 (hereafter “the Rules”), and is specifically in compliance with Rule 16 (1) on the reduction in the use of hazardous substances in the manufacture of electrical and electronic equipment and their maximum allowed concentrations by weight in the homogeneous materials (except for the exemptions listed in schedule II). 

Improper handling, disposal, accidental breakage, damage or improper recycling of e-waste may present risks, including, but not limited to, fire, explosion and/or other hazards, and uncontrolled waste disposal which may be detrimental to or have adverse effects on the environment as it prevents reuse of resources. Some e-waste may contain hazardous chemicals which, if disposed improperly, may make water, soil and other natural resources toxic. Improper disposal may cause harm to plant, animal and human life.

 

Regulatory Information: Taiwan

台灣法規遵循

 

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理 法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

 

應避免影響附近雷達系統之操作。

TAIWAN ROHS 

   

 

Limited Warranty

The limited warranty is available in the Google Hardware Warranty Center

 

© 2024 Google LLC. All rights reserved.

Google, G logo, Pixel Watch, Fitbit, Android and related marks and logos are trademarks of Google LLC. USB-C® is a registered trademark of USB Implementers Forum. The Bluetooth® word mark is a registered trademark owned by the Bluetooth SIG, Inc. FeliCa is a registered trademark or a trademark of Sony Group Corporation or its affiliates.